| |
Pyrotherm Fiberglass Sleeving
 Pyrotherm HT
Braided from continuous E-Glass Filament Yarns, Heat Treated and cleaned to stabilized and control end fray.
- Temperature rated to 1000 degrees F.
- Flexible and expandable to fit over changing contours and diameters
- Easy to apply
Applications
- Protection for hoses, wires, cables, tubing, rollers and tools exposed to excess heat, occasional molten splash or flame impingement
- Available in sizes 1/4" ID to 4" ID
 Pyrotherm HS
Braided from continuous E-Glass Filament Yarns, Heat Treated and coated to stabilized and control end fray.
- Saturated with a synthetic rubber compound
- Temperature rated to 1000 degrees F.
- Offers the same protection and uses as Pyrotherm HT with the added benefits of increased abrasion resistance and end fray control during cutting and flexing.
- Saturant is stable to 400 degrees Fahrenheit and will gradually volatilize without noxious fumes.
- Natural tan color is standard
Applications
- Protection for hoses, wires, cables, tubing, rollers and tools exposed to excess heat, occasional molten splash or flame impingement
- Available in sizes 1/4" ID to 4" ID
 Pyrotherm LW, HW Fiberglass Sleeving
Braided texturized fiberglass sleeving that withstands 1000 degrees F. Made from texturized yarns to provide bulk thermal protection. Low cost economical hose and cable protection. Can be used for additional thermal protection as under sleeve for Pyrotex S/G applications.
Available in 1/16" (LW) and 1/8"(HW) constructions in sizes 3/16” to 4” diameter.
|
|
