Spiral Guard Wrap

Black Spiral Guard Wrap (HDPE) - Atlantex Manufacturing Corp.Protective Spiral – Product Overview

The use of Atlantex Spiral Guard Wrap is an economical and convenient method of protecting and extending the life of hydraulic and pneumatic hoses, cables, wires and rope from premature wear.

Manufactured from extruded high density polyethylene (HDPE), Spiral Guard Wrap will withstand the extremes of climate and operating conditions. The HDPE extrusion process provides a product with round edges which make for easy installation which will not damage hoses. Spiral Guard Wrap protects against abrasion, cuts, crushing, UV and various hazards which can destroy expensive hose and cable assemblies and cause output to suffer due to downtime. Larger sizes are used for both protection and bundling of multiple hose applications. Spiral Guard Wrap’s open spiral design allows for simple installation in the field, without the need to disconnect lines.

Downloads

Spiral Guard Data Sheet

[URIS id=4600]
Working Temperature ° F ° C
Lower Limit: -60 -50
Upper Limit: 210 100
Material Composition
Added Value
High-density Polyethylene Very versatile system protection
Sprial-formed protection system Install without disconnecting lines
Wear, cut, and crush- resistant polymer Provides excellent line visibility
Various colors available SGW is recyclable and reusable
Characteristics
High-quality HDPE provides superior protection against mechanical wear and abrasion, crushing, and cut-through hazards
Resistant to acids, oils, solvents, water, and UV-impingement, rejects dust & dirt
Capable of bundling multiple lines together, providing simultaneous protection
Rounded profile provides non-abrasive edges which will not damage hoses
Protect assemblies from premature wear, reduce maintenance expenditures, and increase uptime
Availability
Available in diameters from 3/8″ (10mm) to 5-1/2″ (140mm)
Spiral Guard Wrap is a stock product, allowing for fast turnaround time
Standard color is Black, other available
Standard package depends on Spiral ID
Available Colors: Replace “-##” in part number with:
-15 Safety Orange
-30 Black (Standard)
-50 Yellow
-60 Blue
-70 Red
-80 Green
Spiral Guard Wrap – Part Numbers
Spiral ID Size Ft/Box ID Range Part Number
3/8″ -6 100 0.250″-0.500″ SGW06-##
1/2″ -8 100 0.500″-0.688″ SGW08-##
3/4″ -12 100 0.688″-0.875″ SGW12-##
1″ -16 100 0.875″-1.125″ SGW16-##
1-1/4″ -20 100 1.125″-1.375″ SGW20-##
1-1/2″ -24 100 1.375″-1.625″ SGW24-##
2″ -32 100 1.625″-2.188″ SGW32-##
2-1/2″ -40 100 2.188″-2.625″ SGW40-##
3″ -48 75 2.625″-3.250″ SGW48-##
3-1/2″ -56 50 3.250″-3.625″ SGW56-##
4″ -64 50 3.625″-4.500″ SGW64-##
5″ -80 40 4.500″-5.125″ SGW80-##
5-1/2″ -88 30 5.125″-5.875″ SGW88-##

Need Pricing? To request a quote or discuss specifications please take a moment to fill out our Request a Quote form.
If you would like to request a sample, please do by filling out the Request a Sample Form.
Additional Questions? Give us a call at (610) 518-6601, or email us at CustomerService@atlantexmfg.com.